In Awe Of Industry

Important Facts You Should Know About The Safety Of Pipelines And Their Construction

Posted by on 3:10 pm in Uncategorized | Comments Off on Important Facts You Should Know About The Safety Of Pipelines And Their Construction

In recent years, pipelines have had a significant and beneficial impact on the ability to transport natural gas, oil, CO2 and refined petroleum from one area to another. Unfortunately, many people are unaware of how safe pipelines are. Therefore, If you live near an area where pipeline construction has already started or will soon begin, it will be very helpful to be aware of the following information about it. #1-Pipelines Can Be Constructed Underwater, But It Rarely Makes Financial Sense To Do So Some people who are opposed to pipelines have suggested simply placing the pipelines in question underwater. However, if a pipeline that was underwater burst, it would be harder to repair than one on soil. That means that a small leak could release a lot of oil, gas, etc. into the water, contaminating the oceans, before repairs could be completed. In addition, it would also be significantly more expensive to lay pipelines under the water due to the weight of water and the aquatic environment. Since that cost would inevitably be offset by customers needing to pay higher costs for the item in question, it is a better idea to lay pipeline underground. #2-Pipelines Can Be Made Of Plastic Or Carbon Steel And Can Have A Diameter Of Just Four Inches If you are concerned about pipelines because you associate them with big, heavy pipes going everywhere, you will be happy to know that is not how it typically works. The diameter of a pipeline can be as little as four inches and it is not unusual for natural gas to be transported in plastic pipes. Another fact to keep in mind is that they are sturdy and it is safe to use them continually. For example, Wikipedia has reported that there is a TransCanada pipeline that has been successfully transporting natural gas from parts of the United States into Ontario since 2012. It supplies approximately 1/6 of all the natural gas used in that area. If you are still concerned about pipelines, it should be comforting to remember that pipelines can be treated with chemical compounds to discourage corrosion of the pipes. The pipes can also be washed with a biocide that will destroy any bacteria that produces sulfur, thus extending the life and safe use of the pipeline. Although rust will always be a concern when water and hot oil come into frequent contact with one another, there are ways to minimize that risk. In conclusion, pipeline construction allows for the successful transport of crucial items like natural gas and oil to areas where it is needed and it is easy to forget how safe pipelines actually are. As a result, if you are concerned about the existing or proposed use of pipelines in your area, becoming aware of the preceding information will be very helpful. Click here for more info on...

read more

Five Advantages To Buying A Crane Vs. Renting

Posted by on 6:43 am in Uncategorized | Comments Off on Five Advantages To Buying A Crane Vs. Renting

If you just won a construction bid or are embarking on a large building project, you likely need a crane to hoist beams and/or lift heavy building materials into place. The mechanics behind the crane have been used since the days of the Ancient Egyptians, and this basic piece of construction equipment is still invaluable today. You may be wondering whether it makes more sense to lease or to purchase one or more cranes for your project. While leasing can be initially less expensive, there are many good reasons to purchase your equipment outright. Five good reasons to buy a crane versus leasing one 1. You control the equipment’s use. When you purchase your equipment, you don’t have to worry about any lease restrictions as to its use. You control where the equipment is used, how long it’s used and what projects it’s used on. In addition, when you lease, it can be difficult to break the lease agreement if the job ends up requiring less time than you originally estimated. When you own the equipment, you can rent it to someone else or even sell it as soon as the project is done. 2. No fees. When you lease equipment, there are a myriad of fees associated with the transaction. When you purchase a piece of equipment outright for cash, there are a minimum of fees. 3. Tax advantages. When you buy a piece of equipment, you can generally deduct your insurance, license, depreciation, taxes and any interest from your corporate income taxes. 4. You control the maintenance. When you buy a new piece of equipment, you know exactly how that crane is serviced and maintained. You don’t have to worry about a mechanic having less exact standards than you do. 5. Less downtime. When you own a crane, you know that it’s available when you need it. When you rely on leasing, you risk that the rental company may not have the equipment you need when you need it. That may prevent you from being able to bid on jobs with a tight or immediate timeline. While buying a crane or other piece of heavy equipment may not be the right choice for every construction company, buying vs. leasing lets you keep control on how and how long the machine is used, helps to reduce fees, gives you better control over the vehicle maintenance and can even possibly give you several good tax deductions. For more information on cranes, talk to a professional like Alpha...

read more

Lubricant And Oilfield Valves: What You Need To Know

Posted by on 8:57 am in Uncategorized | Comments Off on Lubricant And Oilfield Valves: What You Need To Know

Oilfield valves play an important role on equipment used to pump oil from the ground. Some of the valves help to prevent dirt and rock from coming up with the oil, while other valves help pull oil out and through tubes and tunnels so it can be taken and refined. Regardless of what the valve is used for, it needs to be lubricated or oiled. If you are new to the oil industry, you may not know much about lubrication and oilfield valves. Here is some information you should know. Why Your Oilfield Valve Needs to Be Lubricated A valve generally has a knob that lifts and lowers a gate or door located inside. Failing to lubricate the valve can cause the knob or the door-like mechanism inside to fail to work. It can rust or corrode, especially when exposed to outdoor elements such as rain. Lubricating the valve helps both the external knob and the internal mechanism turn and open like they should. This helps preserve the lifespan of the oilfield valve and ensures that it operates as it should. Signs Your Oilfield Valve Needs to Be Lubricated There are a wide array of oilfield valves. There are knife gate valves, gate valves, reset relief valves, pressure relief valves and butterfly valves, just to name a few. Each valve has its own needs and needs to be lubricated at a different time, based on the job it does. When you purchase a valve, the manufacturer should tell you how often the valve should be lubricated. Some valves may need to be lubricated after a certain number of uses, some may need to be lubricated when they are cleaned and others may only need to be done when routine maintenance is being done. Regardless, if your valve is getting hard to turn, is showing signs of rust or corrosion, or you hear squealing or squeaking when the valve is in use, it should be lubricated. Different Lubricants for Different Oilfield Valves Not all oilfield valves are the same, nor do they have the same purpose. As such, there are different lubricants for different valves. The viscosity of the lubricants, or its thickness, varies. Some valves need a higher viscosity lubricant, while others need a thinner lubricant. Before lubricating a valve, make sure you use the correct type of lubricant. Using a lubricant that is not thick enough may prove to be ineffective, while using one that is too thick or creamy for the valve may weigh it down. The valve manufacturer will always tell you what type of lubricant to use with the valve. For more information, contact Advantage Valve Maintenance Ltd. Grande Prairie or a similar...

read more

4 Tips For Keeping Your Water Bottle Cold Throughout The Day

Posted by on 5:55 am in Uncategorized | Comments Off on 4 Tips For Keeping Your Water Bottle Cold Throughout The Day

Whether you find yourself exercising or just sitting at your desk the entire day, it is nice to have a cold bottle of water to drink and keep you hydrated. If you live in a hotter climate a cold bottle of water will quickly turn into hot water within an hour. This can be frustrating to deal with since every location does not have its own cooling system. Fortunately, there are a few tips you can use to make sure your bottle of water remains cold throughout the day. Buy A Mini Fridge for Your Car You can keep your water bottles cool throughout the day by storing them in a mini fridge in your car. A car mini fridge is designed to fit snugly into the back seat or trunk of your car. It is powered by your car’s battery and can be disconnected when it is not in use. These portable mini fridges are great for road trips and other long distance drives. Carry Your Water in an Insulated Water Bottle Insulated water bottles are designed to keep the heat out of the bottle and the cold inside. You can fill up your insulated water bottle with cold water and enjoy it throughout the day. Insulated water bottles are nice for bringing to the gym or park for workouts and exercises. Place an Insulated sleeve Around Your Water Bottle An insulated sleeve works similarly to an insulated water bottle. The only difference is the sleeve can be removed and attached to a new water bottle. If you drink from several plastic water bottles throughout the day, then an insulated sleeve would be a good way to keep your water cold. Once you are done with one water bottle, you can easily transfer the sleeve. Fill Your Lunch Pail with Ice Packs Lunch pails are lined with an insulated fabric that regulates the temperature inside the pail. This prevents food from spoiling inside of the container. You can line the container with a few frozen ice packs. Then place your water bottle and lunch inside of it. The ice packs will keep your water cool during the day since very little heat is able to penetrate the pail. On hot days, it is extremely important to stay hydrated by drinking cold water. With the help of these tips, you can make sure that your water always remains cold once you leave your house. As an alternative, consider having water delivered, such as by the Water Bus water delivery, so you always have cold water on...

read more

Avoid Breakdowns and Secure Your Work Environment—Safety Tips for Operating Pressure Vessels

Posted by on 3:42 am in Uncategorized | Comments Off on Avoid Breakdowns and Secure Your Work Environment—Safety Tips for Operating Pressure Vessels

Large volume pressure vessels are extremely important components of a variety of manufacturing contexts, but their installation creates a new set of responsibilities that a business owner must take care of. When you store large quantities of material under pressure, you’re introducing an element of risk that can thankfully be minimized if your employees take special care to follow some basic safety procedures. Below, you’ll find a guide to some of those procedures and some suggestions for maintaining a safe work environment around pressure vessels. Keeping these tips in mind should allow your work flow to remain uninterrupted, and should create a culture of safety which will guarantee productivity and security for years to come. Maximize Awareness It’s probably impossible to maintain a safe working environment if you have an inadequate understanding of the dangers inherent in your environment. For that reason, it’s important that your employees receive a full briefing on the contents of each pressure vessel, as well as training that covers what to do in the event of a breach. If the people who work around the vessels are aware of their contents, it’s likely that they’ll be more willing to take their safety responsibilities seriously. Maximizing awareness isn’t about introducing fear, but rather about grabbing and holding attention in such a way that stability will be guaranteed. Install Safety Equipment While it’s important to conserve costs in some areas of business operations, it’s equally important to make sure that those cost cutting measures don’t interfere with a secure work environment. Optional safety equipment may seem like it’s above and beyond your requirements as a business operator, but it’s impossible to put a price on the damage that can be caused during a failure. Installing additional pressure gauges, warning alarms, and proper signage will all go a long way toward identifying the work flow of your pressure vessel system and alerting people in the area of potential risks. Going above and beyond your responsibilities is the right choice for a business owner who wants to take their safety responsibilities as seriously as possible. Be Proactive With Maintenance Following a strict maintenance schedule with your pressure vessels is the best way to make sure your operation continues to run safely and smoothly. It’s often said that an ounce of prevention is worth a pound of cure, and following the manufacturer’s suggestions in terms of pressure vessel maintenance is exactly the kind of preventative measure that will save you pounds and pounds of trouble in exchange for very few ounces of effort. For more information about pressure vessel safety measures, contact a company like BWS Fabrication...

read more

Four Common Repair Issues With Overhead Doors

Posted by on 10:29 am in Uncategorized | Comments Off on Four Common Repair Issues With Overhead Doors

Your garage door opener is probably something that you take for granted. You just expect it to work whenever you hit the button or flip the switch. However, a problem with your overhead door can leave you stranded out in the elements or, just as bad, trapped with your vehicle inside of your garage. Knowing the more common issues and when you should call a professional of garage doors in Winnipeg can go a long way toward keeping your door running smoothly. What can go wrong with your overhead garage door 1. Your door won’t open or close all of the way. A garage door that sticks or won’t go all of the way up or down can be the result of a number of issues. It could be as simple as your needing a new battery in your remote control device. This type of problem can also be caused by a faulty sensor that is telling the door that it’s closed or open when it really isn’t. Or, it could be the result of an electrical problem, where not enough power is getting to the door. If changing the battery doesn’t solve the problem, it’s time to call in the professionals. 2. Your door is making loud noises. An extremely noisy door is usually caused by dirt or debris that has become wedged in the track and is hampering the door’s operation. The excess noise can also be a sign that the door’s tracks and hardware need lubrication. Try wiping down the track and spraying a little lubricant along the track. 3. Your door shakes when it descends. A door that shakes from side to side when it goes down likely needs new springs. Replacing the springs on your door is not a good DIY project as these springs are under extreme tension and can be a hazard to someone without the right training and tools; call in a professional. 4. Your door doesn’t operate at all. A door that won’t operate at all can also be caused by several problems. It could be a faulty remote or a dead battery. It could be a problem with the power source, or it could be problem with the opener’s motor.  If you’ve checked the plugs and the remote, but the door still isn’t working, you’ll need to have a technician look at the door. Your garage door isn’t something that you want to be out of order for very long. Knowing some common problems and which you can fix yourself can help you keep your door running smoothly. This knowledge can also give you a heads-up to when you need to call in the professionals, so you don’t waste the time and effort trying to fix a major issue...

read more

3 Signs That You Should Get an Inspection for the Well on Your New Property

Posted by on 2:47 am in Uncategorized | Comments Off on 3 Signs That You Should Get an Inspection for the Well on Your New Property

Are you buying a new piece of property? Does the property have a water well? If so, you may want to get an inspection of the well before you close on the property. A well inspection can tell you whether the well is operating properly and whether the well is vulnerable to any kind of contamination. Usually, the buyer of a property has to pay for this type of inspection. However, it could be a wise investment. If the well has serious damage or construction issues, then you may want to negotiate repairs into the final purchase contract. Here are three signs that you may need a well inspection: The well cover isn’t firmly sealed. The well cover is your well’s first line of defense against insects and pollution. The well should be firmly sealed shut so that it prevents any contaminants from getting into the well. Check the well cover and see if it budges when you try to lift it up. Also, look to see if there is a visible o-ring sealant around the base of the cover. Do you see any cracks or gap? If so, it may mean that the sealant has worn down over time and contaminants are leaking into the well. A well inspection can offer a more thorough review of the cover to make sure that it has a sufficient seal. The well is located in a vulnerable position. Ideally, a well should located in a space that isn’t vulnerable to pollutants or runoff. That means that water should run away from the well. It also shouldn’t be near a septic tank or leach field and it shouldn’t be in an area that is treated with pesticides or other pollutants. If the well is in one of these areas, you may want to have an inspection to see if pollutants are entering the well. Also, look to see if water collects near the well after a rain storm. It’s possible for rain water to pick up pesticides and other pollutants as it drains downhill. If that water then sits and pools near the well, then the pollutants could penetrate the wells casing. The well’s inspection history is spotty. At the very least, the seller should be able to provide you with documentation about the well’s history. That documentation should list when the well was built, what materials were used, and it should state the results of all inspections and water quality tests. If the seller doesn’t provide this document or if the well has an inconsistent inspection history, then you may want to just go ahead and have your own inspection done. Getting in the habit of having regular inspections will help you keep your well safe. It will also help you build your own documentation that you can provide when you sell the property in the future. For more information, contact a well inspection service like Brewster Artesian water well drilling in your area. They can advise you on whether an inspection is necessary for your...

read more

Dealing With A Slow Moving Garage Door: The Probable Cause & Solution

Posted by on 1:07 pm in Uncategorized | 0 comments

Are you tired of having to wait a long time for the garage door to open and close? You can attempt getting the door repaired, but a replacement may be the most efficient option. In this article, learn what can cause a garage door to move slowly and the average price of a replacement. What is the Reason for a Slow Moving Garage Door? One of the common reasons for a slow moving garage door is wheel damage. There are wheels attached to both sides of the garage door that are used for moving the door along the tracks. The wheels may be rusty or bent, which leads to slow movement of the door. Getting the wheels replaced may be the solution to your problem. The tracks along the sides of the door may also cause slow movement when they are damaged. There are several things that can go wrong with the tracks, including: Getting bent up Misalignment from loose screws Accumulating rust from water exposure Solving the problem with tracks can be done by realigning them and tightening up the screws. If rust is the problem, getting the tracks oiled may be the solution. However, bent up tracks will likely have to be replaced. It is also possible that your garage door is moving slow from normal wear and tear, especially if you have had it for a long time. You can get the old door replaced if you want it to move faster. The great thing about replacing the garage door is that an updated one may offer more insulation for your house. Modern garage doors are often constructed to be energy efficient, but it will depend on what you choose to get. How Much Should a Homeowner Plan to Spend on a New Garage Door? The price of your garage door replacement will depend on the size needed and what kind of material it is constructed out of. You have the option of getting a steel, aluminum or wooden garage door. The average cost for a new door can be as high as $3,000 plus. Customized wooden doors are the most expensive, but opting for a door with energy efficient windows in it can also affect the price. You should be able to hit the button on the garage remote and open the door fast. Get rid of your slow garage door by hiring a specialist, like those from Crowfoot & Cross Town Garage Door Services in Calgary, to replace...

read more

3 Tips For Surviving A Rough Storm

Posted by on 1:33 am in Uncategorized | 0 comments

If you live in an area prone to tropical storms, tornadoes or hurricanes, you will need to be sure you are prepared. These storms can wreak havoc on your property and leave you without power for an extended period of time. In order to make sure you are able to pick up the pieces after such an incident, you’ll need to be sure you take full advantage of some information that can help you out. If you want to survive these storms in the most favorable way possible, read on.  Tip #1: Invest In A Good Generator And Learn How To Use It People who want to get the best out of their time during a storm should make sure that they invest in a quality electrical generator. When you buy a portable generator, you’ll be able to use your electronics, which will help you retain some normalcy and still be able to handle the essentials. You should get used to starting and using the generator prior to the storm hitting, so that you don’t find yourself in a tough position. Consider some of the following tips when using your generator: Use the generator in an area that has a lot of ventilation, so that you avoid carbon monoxide poisoning, which kills people every year Check your local ordinances to know the proper laws for storing the fuel for your generator Be judicious with the generator usage, making sure that you turn it off from time to time to preserve fuel. Make communication devices, cooking tools and work-related items a priority when hooking items up to the generator Tip #2: Keep Your Trees Manicured One of the most crucial things that you can do for your home and well being is cut down or trim your trees, in order to protect your home. Calling up a tree service expert prior to the storm will allow you to make the most of your property and allow you to keep your power lines free. Having a tree fall on your power lines can set you back much longer than the duration of the storm, so being proactive about it is the best way to go.  Tip #3: Maintain A Tub Full Of Water Since you never know how long the storm will last, you owe it to yourself to be sure that you fill your tub with water. Doing this will allow you to have water available, whether you need to flush your toilet, bathe or drink from it. This is especially beneficial if the backlash from the storm lasts longer than you expect.  Take advantage of these tips so that you’re able to survive a storm that hits your area...

read more

A New Driveway: Two Factors To Consider

Posted by on 4:51 am in Uncategorized | 0 comments

A new driveway adds immense curb appeal to your home. Driveways that are cracked and broken, peeling or faded affect how passers-by view the upkeep of your property. Even if your garage and the exterior of your home are freshly painted, if your driveway needs work, few people are going to be impressed. Remedy this situation, however, by updating the sorry state of your existing driveway. If you have this project on your to-do list, consider the following two factors before moving forward. These will ensure you get the best bang for your driveway buck: Choice of Material Concrete is a more traditional choice in driveway paving, but asphalt is more affordable. Both have their advantages and disadvantages: Concrete takes longer to cure — typically three to seven days. Concrete has more of a tendency to crack over time. It’s more expensive to repair a concrete driveway. Concrete offers a more up-scale appearance. Your vehicle won’t leave imprints on concrete on very hot days. Alternatively, if you’re considering paving your driveway with asphalt, you’ll want to keep these factors in mind: Asphalt is more affordable. It cures more quickly — usually within 24 to 48 hours. It’s less likely to crack over time. Repairing an asphalt drive is cheaper. Asphalt offers up a strong, unpleasant aroma as it’s being poured. It has a tendency to soften under extremely hot temperatures.  Both materials will give you a stable, functional, and attractive new driveway. But you should weigh the pros and cons of each before deciding.  Maintenance Involved If you have your driveway paved by a professional paving contractor, its care and maintenance should be relatively simple. What you don’t wish to encounter are pools of standing water either on or next to your new driveway. This can be a sign that the driveway was improperly graded and can result in more maintenance for you. Depending upon the type of material you choose for your driveway, a simple hosing off on occasion should be all you have to do. You may need to re-seal your driveway once every few years, and you may have to be careful about driving overweight vehicles onto it to avoid leaving impressions or otherwise damaging the surface. Your new driveway will serve you well if you take time to research all you can about it first. Know what material works best for your lifestyle. Hire a reputable contractor. And provide proper maintenance. If you do these three things, your driveway will be an asset to your curb appeal for years to come.  Go to sites about driveway paving for more...

read more